A fixed head, on a line that never stops
An inline station earns its place where the product already moves at a controlled speed and the volume makes a manual pass impractical. Filling and packaging lines, extrusion runs, labelling lines and warehouse sorters all present the product to a fixed point — exactly what a fixed head needs.
| Parameter | Value |
|---|---|
| Print heads | One to four, mounted in a vertical stack and stitched into one image |
| Print width | 12.7 mm per half-inch head; 25.4 mm per one-inch head |
| Stitched width | Two one-inch heads give 50.8 mm; four give 76.2 mm |
| Character height | 6.35 mm with a single head, up to 76.2 mm with four |
| Resolution | 600 dpi standard, up to 1200 dpi on higher-resolution configurations |
| Throw distance | 0.5–8 mm |
| Trigger | Photocell product detection, encoder synchronisation, or timed firing |
| Enclosure | IP54 to IP67, chosen to the environment rather than fixed |
How the wider band is built, and what it costs
Alignment plus timing
Each head has to continue the previous nozzle row without a seam a scanner would notice, and the fire timing has to absorb the physical offset between heads.
The upkeep is the cost
Every added head is another alignment to hold, another plate to keep clean, another place a dropout can appear. Fit the fewest heads that cover your content.
Spend the margin on speed
If a job runs comfortably with two heads, adding a third buys height you do not need and costs you throughput and maintenance attention you do.
What decides success, in order of importance
Surface and ink
What the code lands on decides the ink family before anything else. A non-porous face wants solvent; absorbent carton does not.
The drying budget
The distance from the head to the first thing that touches the code, divided by line speed. If that comes out short, the fix is layout rather than a cartridge.
Content and height
The tallest code you print, not the average, decides how many heads you need. A single date line needs one; a four-line block with a QR needs more.
Trigger and enclosure
Photocell, encoder or timed firing follows from how the product is presented. The IP rating follows from the washdown routine the line already has.
The cartridge is ours; the platform is not
We formulate the inks and build, fill and test the cartridges. The inline platform is engineered and built by established coding-equipment makers we source from directly, so cartridge and machine are specified as one system rather than bought separately and hoped to match.
That matters most on an inline line, where the head position, the trigger and the enclosure all interact with the ink choice. A cartridge that performs on a bench can fail on a machine whose head sits in a different place — which is why the platform and the consumable belong in one conversation.
Send the printer model, the material, the line speed and the code content, and you will get an answer that names one recommendation rather than a catalogue.
Get Started
READY TO SCALE
YOUR PRINT OPERATION?
Send us your printer model and monthly volume. We'll respond within 24 hours with pricing, spec sheets, and sample availability.