Skip to content

Handheld Coder · 12.7 mm

The printhead goes to the product

A half-inch handheld unit is the right tool wherever the product is too large, too awkward or too infrequent to bring to a fixed station. It is not a compromise on an inline printer — it is a different answer to a different question, and the question is whether the product moves on its own.

Parameter Value
Print width 12.7 mm (half-inch)
Character height 1.2–12.7 mm
Resolution 600 dpi, print-mode dependent
Trigger Manual trigger, internal encoder wheel
Throw distance 2–5 mm; 1–2 mm puts the drops where you aimed them
Cartridge HP45-format TIJ 2.5, 12.7 mm body
Environment Dry indoor use — not a washdown-rated enclosure
Stitching Not available: one unit carries one cartridge

What it does well

  • Pallets, drums and cable reels that will never ride a conveyor
  • Large mouldings, welded frames and assembled parts
  • Rework, relabelling and overprinting in a warehouse
  • Anything that arrives in ones and twos rather than as a stream

What it will not do

  • The operator’s hand does the job a carriage would — which means position, angle and sweep speed get decided again for every code. Two operators with one unit can produce two different results.
  • Enclosures are built for dry indoor work. A washdown routine needs a different machine.
  • One cartridge per unit means no stitched band — a code needing 76.2 mm of height is not a handheld job.
  • Rules about which cartridge fits which printer are decided by the machine, not by the cartridge. Confirm the seat before ordering.

Why the width is decided before the machine

A 12.7 mm body covers one line of date, batch or serial very comfortably, and two compact lines at reduced character height. Add a QR or Data Matrix that has to share the band with a date line and the symbol gets squeezed — which is the point where the half-inch stops being adequate and the one-inch body earns its extra weight.

The one-inch unit is also heavier and changes the balance of the device, which matters by the end of a shift. Operators handle a tiring tool less carefully. If you need the wider band, plan for that; if you do not, do not carry the weight for nothing.

A fixture is worth considering for anything curved or narrow. Hand the unit to two operators and compare the codes: if they differ visibly, no amount of retraining will hold the result, because the part is moving relative to the head.

Get Started

READY TO SCALE
YOUR PRINT OPERATION?

Send us your printer model and monthly volume. We'll respond within 24 hours with pricing, spec sheets, and sample availability.

24h Response Free Samples MOQ Flexible OEM / ODM